How To Remove Wallpaper Borders

So you bought a new house. You love everything about it except for the ugly wallpaper borders in almost every room. Time to get them off the wall. Removing wallpaper borders is not an easy task, but with a few good tips and some elbow grease, you can get the job done.

The best way to remove the wallpaper border depends on what type of wallpaper was used, what type of surface it was glued on and what type of adhesive was used. One of the easiest things you can try is to use a hair dryer to heat the wallpaper border which may loosen the adhesive enough to let you peel it off.

Usually if the border has been glued to wallpaper, it will come off fairly easy. Slightly mist it down and use a plastic scraper to remove it from the wall. If the wallpaper border has a vinyl covering that won’t let the water or any commercial wallpaper remover soak through, use a perforation tool over the entire surface of the border to allow it to soak in.

If the wallpaper border has been glued directly onto a painted wall, use warm water and some commercially available wallpaper remover and give it plenty of time to soak in before you try to scrap it off.

Steaming also works well for removing wallpaper borders. Steam the entire surface of the wallpaper border. Start from the bottom to the topmost part in sections. If the adhesive is very strong, steam the boarder twice or more until the wallpaper boarder starts to loosen from the wall. Use a plastic or soft metal scraper to avoid damaging the wall. Scrape the border off the wall working from the bottom up. Use warm water and a clean sponge to remove any remaining adhesive from the wall.

Instead of using a commercially available wallpaper stripper, you can also use a mixture of fabric softener and water. Mix 1 capful of fabric softener with 1 quart of water. Pour it in a spray bottle and spray it right on the wallpaper border. For very strong adhesives, you can also use a sponge and soak the boarder with pure fabric softener.